Effect of heat‐sealing temperature on the failure criteria of oriented polypropylene/cast polypropylene heat seal

Failure criteria of the heat‐sealed part of oriented polypropylene (OPP) and cast polypropylene (CPP) heat seals made by an impulse type heat‐sealing machine were investigated. Circular notches and precracks were introduced to direct failure to specific areas such as inside the seal, at the border, or at the unsealed part. The notched strength as a function of heat‐sealing temperature revealed that the seals were stronger in the transverse direction (TD) as compared with the machine direction (MD). Tensile failure that occurred inside the heat seal is more sensitive to sealing temperature, whereas that at the unsealed part is immune. The stress intensity factor (K₁) is generally higher along the TD. At high sealing temperatures, i.e. above 150°C, orientation in the OPP film is relaxed and this results in consistently low mechanical properties at this temperature range. This morphology was revealed by studies of crystalline orientation state and FTIR imaging. POLYM. ENG. SCI., 46:205–214, 2006. © 2005 Society of Plastics Engineers     

Active sites of Cu-ZSM-5 for the decomposition of acrylonitrile

The catalytic decomposition of acrylonitrile (AN) over Cu-ZSM-5 prepared with various Cu loadings was investigated. AN conversion, during which the nitrogen atoms in AN were mainly converted to N₂, increased as Cu loading increased. N₂ selectivities as high as 90–95% were attained. X-ray diffraction measurements (XRD) and temperature-programmed reduction by H₂ (H₂-TPR) showed the existence of bulk CuO in Cu-ZSM-5 with a Cu loading of 6.4 wt% and the existence of highly dispersed CuO in Cu-ZSM-5 with a Cu loading of 3.3 wt%. Electron spin resonance measurements revealed that Cu-ZSM-5 contains three forms of isolated Cu²⁺ ions (square-planar, square-pyramidal, and distorted square-pyramidal). The H₂-TPR results suggested that in Cu-ZSM-5 with a Cu loading of 2.9 wt% and below, Cu⁺ existed even after oxidizing pretreatment. The activity of AN decomposition over Cu/SiO₂ suggested that CuO could form N₂, but, independent of the CuO dispersion, nitrogen oxides (NO_x) were formed above 350 °C. Cu⁺ and the square-pyramidal and distorted square-pyramidal forms of Cu²⁺ showed low activity for AN decomposition. Temperature-programmed desorption of NH₃ suggested that N₂ formation from NH₃ proceeded on Cu²⁺, resulting in the formation of Cu⁺. The Cu⁺ ions were oxidized to Cu²⁺ at around 300 °C. Thus, high N₂ selectivity over Cu-ZSM-5 with a wide range of temperature was probably attained by the reaction over the square-planar Cu²⁺, which can be reversibly reduced and oxidized.     

A new solution for splay‐to‐bend transition in OCB mode with a twisted area

Abstract— Quick, stable transition from splay‐to‐bend alignment in optically compensated bend (OCB) mode is crucial for practical use. This has been achieved by surface treating part of a pixel with a chiral dopant to induce a twist alignment while controlling the twist direction. The effectiveness of this new method was confirmed in a prototype TFT‐LCD panel.     

Granular Reasoning Using Zooming In & Out: Part 2. Aristotle's Categorical Syllogism

The concept of granular computing is applied to Aristotle's categorical syllogism. Such kind of reasoning is called granular reasoning in this paper. For the purpose, two operations called zooming in & out are introduced to reconstruct granules of possible worlds.     

Heavy arsenic doping of silicon grown by atmospheric pressure selective epitaxial chemical vapor deposition

Selective epitaxial Si with a high arsenic concentration of 2.2×10¹⁹ atoms/cm³ was deposited at a high growth rate of 3.3 nm/min under atmospheric pressure. It was confirmed that this method had excellent selectivity and produced films having good crystalline quality, abrupt dopant profiles at the interfaces, and smooth surfaces. The growth mechanism is discussed in terms of the relationship between the effects of arsenic surface segregation and etching by hydrogen chloride.     

Skew simulation of a paper transferred by rubber rollers in printers

A skew of a paper transferred by rubber rollers in printers is simulated by FEM software. Effects of an imbalance of preload, an imbalance distribution of coefficient of friction and a front tension on the paper skew are investigated and how to determine the skew direction are shown. A simulation model is composed of a feed roller, a preload roller and a paper. The feed roller is rotated forcibly by a certain degree at every calculation step and a deformation, displacement and strain of the paper and rollers are calculated. A series of calculation results is shown as a motion simulation. The results show that the paper skews to the smaller preload side, to the smaller coefficient of friction side, or to the opposite side of the front tension. Further, effects of a skew prevention guide plate is simulated.     

Informative patches sampling for image classification by utilizing bottom-up and top-down information

In image classification based on bag of visual words framework, image patches used for creating image representations affect the classification performance significantly. However, currently, patches are sampled mainly based on processing low-level image information or just extracted regularly or randomly. These methods are not effective, because patches extracted through these approaches are not necessarily discriminative for image categorization. In this paper, we propose to utilize both bottom-up information through processing low-level image information and top-down information through exploring statistical properties of training image grids to extract image patches. In the proposed work, an input image is divided into regular grids, each of which is evaluated based on its bottom-up information and/or top-down information. Subsequently, every grid is assigned a saliency value based on its evaluation result, so that a saliency map can be created for the image. Finally, patch sampling from the input image is performed on the basis of the obtained saliency map. Furthermore, we propose a method to fuse these two kinds of information. The proposed methods are evaluated on both object categories and scene categories. Experiment results demonstrate their effectiveness.     

Japanese/English Cross-Language Information Retrieval: Exploration of Query Translation and Transliteration

Cross-language information retrieval (CLIR), where queriesand documents are in different languages, has of late become one ofthe major topics within the information retrieval community. Thispaper proposes a Japanese/English CLIR system, where we combine aquery translation and retrieval modules. We currently target theretrieval of technical documents, and therefore the performance of oursystem is highly dependent on the quality of the translation oftechnical terms. However, the technical term translation is stillproblematic in that technical terms are often compound words, and thusnew terms are progressively created by combining existing basewords. In addition, Japanese often represents loanwords based on itsspecial phonogram. Consequently, existing dictionaries find itdifficult to achieve sufficient coverage. To counter the firstproblem, we produce a Japanese/English dictionary for base words, andtranslate compound words on a word-by-word basis. We also use aprobabilistic method to resolve translation ambiguity. For the secondproblem, we use a transliteration method, which corresponds wordsunlisted in the base word dictionary to their phonetic equivalents inthe target language. We evaluate our system using a test collectionfor CLIR, and show that both the compound word translation andtransliteration methods improve the system performance.     

Thermal management of edge‐lit wide color gamut backlight for LCD using red laser diodes and cyan LEDs

The color gamut is one of the critical parameters that dictate the image quality of displays. The liquid crystal displays using white color light‐emitting diodes (LEDs) as the backlight, though having been widely employed recently, are not very satisfactory in terms of their color gamut because of the broad spectrum inherent to white LEDs. This prompted the authors to develop improved liquid crystal displays using an edge‐lit wide color gamut backlight that used red laser diodes and cyan LEDs. Generating laser beams with high color purity, the laser diodes are light sources with a significant effect on expanding the color gamut. However, laser diodes, red ones in particular, have unfavorable thermal characteristics. To cope with this shortcoming, the authors clearly defined the restrictive criteria for laying out two kinds of light source on the edge‐lit backlight and made a prototype 55‐type laser backlight for performance evaluation.     

Mean–variance relationship of the number of flows in traffic aggregation and its application to traffic management

We consider the mean–variance relationship of the number of flows in traffic aggregation, where flows are divided into several groups randomly, based on a predefined flow aggregation index, such as source IP address. We first derive a quadratic relationship between the mean and the variance of the number of flows belonging to a randomly chosen traffic aggregation group. Note here that the result is applicable to sampled flows obtained through packet sampling. We then show that our analytically derived mean–variance relationship fits well those in actual packet trace data sets. Next, we present two applications of the mean–variance relationship to traffic management. One is an application to detecting network anomalies through monitoring a time series of traffic. Using the mean–variance relationship, we determine the traffic aggregation level in traffic monitoring so that it meets two predefined requirements on false positive and false negative ratios simultaneously. The other is an application to load balancing among network equipments that require per-flow management. We utilize the mean–variance relationship for estimating the processing capability required in each network equipment.